SpecT-1	Chassis:
SpecT-1A	Any commercially available 1/10th scale direct drive pan car chassis is eligible, must maintain the original
	manufacturers main chassis plate.
SpecT-1B	After market bumpers are permitted but must not protrude outside of the body.
SpecT-1C	Max width = 9.875", Min Width = 7.25", Max length = 20", Max Wheel Base = 11", Min Wheel Base = 9",
	Ride Height (bottom chassis) = .1875" minimum
SpecT-1D	Weight of the car race ready - including transponder (personal or track supplied) must be 40 ounces
	or 2.8 lbs
SpecT-2	Bodies:
SpecT-2A	Bodies must be of NASCAR truck style - Approved bodies are as follows:
	McAllister - Flying M Bodies: #176, #218, #215, #203
	HPI - #7735 & 17500 Venom T-10, #7401 Chevy Silverado, #7051 Ford F-150, #7050 Dodge Ram
	Protoform / Proline - #1478-00 Chevy Silverado
SpecT-2B	Rear of the body MAY NOT BE CUT OUT - must remain intact & must measure a minimum of 2" below the
	top of the truck bed.
SpecT-2C	Bodies must be realistically trimmed - wheels wells must be cut out with 100% of the tire visible.
SpecT-2D	Bodies must be realistically painted:
		Windows must be transparent
		Truck beds must be painted
SpecT-2E	Rear spoilers are permitted with max. height of 2" from top of truck bed
SpecT-2F	NO REAR WINGS ARE PERMITTED
SpecT-2G	The Hooter Chassis Outlaw Tour Sticker Must Be Placed On The Rear Window Area of the truck
SpecT-3	Batteries:
SpecT-3A	THE ONLY LEGAL BATTERIES are the TRINITY STREET / SPEED SPEC 1600mah 4 CELL STICK PACKS
	The batteries must remain in the original shrink wrap - no reconfiguration / alteration of the battery packs
	is permitted in any way.
	Battery packs must maintain the original sticker at all times.
SpecT-3B	Battery Connectors MAY BE changed, Battery wire connector length not to be shortened significantly - just
	enough to justify connector change if made.
SpecT-3C	NO RECEIVER PACKS ARE PERMITTED
SpecT-4	Motors:
SpecT-4A	Motors will be supplied & distributed by The Hooter Chassis Outlaw Tour at each event - one motor per entrant
	will be given out & that motor is to be run the entire event.  Motors will be numbered for tracking.
SpecT-4B	These motors will be the sealed 540 motors - NO MODIFICATIONS ARE PERMITTED TO THESE MOTORS
	IN ANY WAY.  Any changes to the motors will result in a DQ for the event as well as a replacement motor
	charge - this charge must be paid before the person is allowed to run any further Tour Events from that time
	forward.  If a motor is found altered it will be removed from the Tour Supply & that number be made clear to all
	Tour participants.
SpecT-4C	Motors must be returned at the end of the event - Any motor not returned will result in a DQ & replacement
	motor charge.  The person who last had said motor will not be eligible to participate in any further Tour
	events until the charge has been paid. - If a person leaves with said motor they have bought it & may not
	just return it at the next event.  Must provide cash value.
	THESE RULES ARE TO ENSURE THE MOTORS ARE KEPT UN-ALTERED IN ANY WAY & PROVIDE
	THE BEST EQUAL CONTROL FOR THE CLASS.
SpecT-5	Tires:
	SPEC FOAM TIRES ONLY ARE PERMITTED
	Legal spec tires are by Trinity & BSR & T.M. - any color compound allowed
	Wheel Dia - min = 1 5/8", max = 2"				Tire Width - min = 3/4", max = 2"
HAVE FUN EVERYONE - THAT'S WHAT IT'S ALL ABOUT!!!
Check us out at www.hooteroutlawtour.com