2009-2010 Spec Truck Rules

SpecT-1 Chassis: Any commercially available 1/10th scale direct drive pan car chassis is eligible, must maintain the original manufacturers main chassis plate.

SpecT-1a After market bumpers are permitted but must not protrude outside of the body.

SpecT-1b Max width = 9.875", Min Width = 7.25", Max length = 20", Max Wheel Base = 11", Min Wheel Base = 9", Ride Height (bottom chassis) = .1875" minimum

SpecT-1c Weight of the car race ready - including transponder (personal or track supplied) must be 40 ounces or 2.8 lbs

SpecT-2 Bodies: Bodies must be of NASCAR truck style - Approved bodies are as follows: McAllister - Flying M Bodies: #176, #218, #215, #203, HPI - #7735 & 17500 Venom T-10, #7401 Chevy Silverado, #7051 Ford F-150, #7050 Dodge Ram, Protoform / Proline - #1478-00 Chevy Silverado

SpecT-2a Bodies must be realistically trimmed - wheels wells must be cut out with 100% of the tire visible.

SpecT-2b Bodies must be realistically painted: Windows must be transparent.

SpecT-2c Rear spoilers are permitted with maximum height of 2" from top of truck bed. Rear of body cannot be removed.

SpecT-2d NO REAR WINGS ARE PERMITTED

SpecT-2e The Hooter Chassis Outlaw Tour Sticker Must Be placed On the Rear Window Area of the body.

SpecT-3 Batteries: THE ONLY LEGAL BATTERIES are the TRINITY STREET / SPEED SPEC 1600mah 4 CELL STICK PACKS. The batteries must remain in the original shrink wrap - no reconfiguration / alteration of the battery packs is permitted in any way. Battery packs must maintain the original sticker at all times.

SpecT-3a Battery Connectors MAY BE changed, Battery wire connector length not to be shortened significantly – just enough to justify connector change if made.

SpecT-3b NO RECEIVER PACKS ARE PERMITTED

SpecT-4 Motors: Motors will be supplied & distributed by The Hooter Chassis Outlaw Tour at each event - one motor per entrant will be given out & that motor is to be run the entire event. Motors will be numbered for tracking.

SpecT-4a These motors will be the sealed 540 motors - NO MODIFICATIONS ARE PERMITTED TO THESE MOTORS IN ANY WAY. Any changes to the motors will result in a DQ for the event as well as a replacement motor charge - this charge must be paid before the person is allowed to run any further Tour Events from that time forward. If a motor is found altered it will be removed from the Tour Supply & that number be made clear to all Tour participants.

SpecT-4b Motors must be returned at the end of the event - Any motor not returned will result in a DQ & replacement motor charge. The person who last had said motor will not be eligible to participate in any further Tour events until the charge has been paid. - If a person leaves with said motor they have bought it & may not just return it at the next event. Must provide cash value.

THESE RULES ARE TO ENSURE THE MOTORS ARE KEPT UN-ALTERED IN ANY WAY & PROVIDTHE BEST EQUAL CONTROL FOR THE CLASS.

SpecT-5 Tires: SPEC FOAM TIRES ONLY ARE PERMITTED

Legal spec tires are by Trinity & BSR & T.M. - any color compound allowed

Wheel Diameter - min = 1 5/8", max = 2" Tire Width - min = 3/4", max = 2"

HAVE FUN EVERYONE - THAT'S WHAT IT'S ALL ABOUT!!!

Check us out at www.hooteroutlawtour.com