4CS-1	Any 1/10th scale direct drive pan car chassis is eligible provided it follows any guidelines in the ROAR rules
4CS-2	No bumpers will be allowed to protrude outside of the body of the car.
4CS-3	Weight of the car race ready - including transponder (personal or track supplied) must be 40 ounces
	or 2.8 grams
4CS-4	Max width = 9.875", Min Width = 7.25", Max length = 20", Max Wheel Base = 11", Min Wheel Base = 9",
	Ride Height (bottom chassis) = .1875" minimum
4CS-5	Any stock car body is allowed & must be trimmed realistically (backs may be cut out to the trunk line
	not above).  Bodies must cover all 4 wheels (all wheels must be cut out 100% visible), windows must be
	Transparent.  Hooter Chassis Outlaw Tour sticker placed in the rear window area.
4CS-6	Rear Wings ARE NOT PERMITTED - This is to keep the scale realism of the cars look
	Rear Spoilers: may not be greater than .75" tall from the trunk lid.
4CS-7	MOTORS:  The ONLY Motors which will be Legal for the Hooter Chassis Outlaw Tour will be the Trinity
	Monster, Cobalt & X-Stock, Stock Motors. NO OTHER Motors will be permitted throughout the entire
	2008 - 2009 Race Series regardless of any new ROAR legal qualifications.  These are locked timing (tab
	must be present), 27 turn - 24 degree timing, rebuildable motors. NO BEARINGS PERMITTED
	All endbell hardware must be stock & may not be altered in any way.  (spring posts may be swapped)
4CS-8	BATTERIES:  5000mahr capacity will be the max allowable throughout the entire Hooter Chassis Outlaw
	Tour Series regardless of any new ROAR legal qualifications.
4CS-9	TIRES:  Any commercially available foam tires only - no rubber tires.
	Wheel Dia - min = 1 5/8", max = 2"				Tire Width - min = 3/4", max = 2"
HAVE FUN EVERYONE - THAT'S WHAT IT'S ALL ABOUT!!!
Check us out at www.hooteroutlawtour.com