13.5 SINGLE CELL

4CS-1: Any 1/10^th scale direct drive pan car chassis is eligible provided it follows any guidelines in the ROAR rules.

4CS-2: No bumpers will be allowed to protrude outside of the body of the car.

4CS-3: Weight of the car race ready including transponder (Personal or track supplied) must be a minimum 36 ounces.

4CS-4: Max. width = 9.875”, Min. width = 7.25”, Max. length = 20”, Max wheel base = 11”, Min. wheel base = 9”, Ride Height (chassis bottom and body) = .1875” minimum (3/16”)

4CS-5: Any stock car body is allowed and must be trimmed realistically (backs may be cut out to the trunk line, not above). Bodies must cover all 4 wheels (all wheels must be cut out, 100% visible), windows must be transparent. HCOT sticker placed in the rear window area.

4CS-6: Rear wings ARE NOT PERMITTED – this is to keep the scale realism of the car’s appearance. Rear spoilers: may not be greater than .75” tall from the trunk lid.

4CS-7: Motors: Any Sensored 13.5

4CS-8: Battery: Any 1cell LIPO ROAR approved by September 1, 2010.

4CS-9: ESC: Tekin v200 or less, MMP no C.H.E.A.T., LRP SPX

4CS-10: Tires: Any commercially available foam tires only – no rubber tires.

Wheel diameter - min. = 1 5/8”, max. = 2”, Tire width – min. = ¾”, max. 2”